How to prebake pie crust — and why you should (2024)

A soggy bottom. Not something you want for your baby. Or your pie crust. And while we can’t help you with your baby, there’s a simple solution to pies with soggy bottoms: prebake the crust.

1) Why do you prebake pie crust?

There are a number of reasons your pie can end up with a soft, pale, underbaked crust — and steps you can take to help prevent that unfortunate result.

But the one surefire way to make certain your pie’s crust will be golden brown, crisp, and delicious — just as appealing as its filling — is to prebake it. That’s right: bake the bottom crust first, before adding the filling.

2) When do you prebake pie crust?

Most commonly, it's smart toprebake pie crust when:

  • You’re baking a single-crust pie whose filling doesn’t require any baking (think bananacream); in this case, you'll need to fully prebake the crust.
  • The filling requires only a short bake at a relatively low temperature (e.g. custard); for these kinds of pie, you'll need to partially prebake the crust, as it'll finish baking once it's filled and in the oven.

A typical pastry pie crust (as opposed to a graham cracker or cookie crust) requires quite a long time in the oven to become golden brown and crispy. This isn’t a problem when the filling is fruit: apples, peaches, blueberries, and their ilk soften and then settle down to a gentle simmer as the crust gradually bakes to perfection for a long while in the oven.

How to prebake pie crust —and why you should (1)

But some fillings mightinstead cookfully on the stovetop, like the rich, thick filling for chocolate cream pie. When it’s done, you simply pour it into its crust — and said crust had better be prebaked to perfection, since the pie’s not going anywhere near an oven.

Other pies, typically those with a more delicate, egg- and cream-based filling (think custard pie or quiche) require at least some baking — but don’t spend long enough in the oven (at a high enough temperature) to guarantee a fully baked, brown and crispy crust.

In these cases, you need to prebake your crust.

3) How do you prebake pie crust?

The recipe you're following may explain explicitly how to prebake your crust. But if it doesn't, follow this process:

First, roll your bottom crust and place it in the pan. Crimp or flatten the edge. Chill it for 30 minutes, to relax the gluten and firm up the fat(s); this will help prevent shrinkage, so don't skip!

How to prebake pie crust —and why you should (2)

Line the crust with foil, parchment, or a paper coffee filter. Fill it about two-thirds full with dried beans, uncooked rice (or other uncooked grain berries), pie weights, or granulated sugar.

Bake the crust in a preheated 375°F oven for 20 minutes, set on abaking stone or steelif you have one. Remove the crust from the oven and lift out the liner and weights. (If you’ve used sugar, save it for your future baking; it’ll be lightly toasted and yummy!)

At this point your crust is partially prebaked, and good for any of your pies that tend to exhibit a wan, flabby bottom crust when done. Think pumpkin pie: You don’t want to bake the filling so long that it’s stiff and dry, but you may pull your pie out of the oven to find your perfectly baked filling isresting in a partially baked crust. Prebaking your crust partway is a sensible solution for this scenario.

To fully prebake the crust, prick the bottom all over with a fork to prevent bubbles. Return the crust to the oven and bake for an additional 20 to 25 minutes, until it’s golden all over.

4)How do you prevent shrinkage and slipping while prebaking pie crust?

If, despite your best efforts, the lined, weighted crust still slips down the inside of the pan while it prebakes, try this: Bake the crust upside down.

To start, you’ll need two identical (or nicely nestable) pie pans with flat rims.

Place your rolled-out crust in one of the pans, anchoring it to the rim of the pan with a fork-tine crimp. Place a liner of some kind (same as above: parchment, foil, coffee filter) into the pan. Nest the second pan into the first.

How to prebake pie crust —and why you should (3)

Pick up both pans, turn them over, and set them on a baking sheet. Place the baking sheet and pie pans in the oven, and bake as directed above. As the crust bakes, gravity will pull it down toward its rim — rather than into a puddle at the bottom of the pan. Magic!

After 20 minutes remove the baking sheet from the oven, carefully turn the pans over, lift out the empty pan, and remove the liner. At this point, your crust is partially prebaked. To prebake it fully,place the crust back in the oven, right side up, and bake until it's golden.

How to prebake pie crust —and why you should (4)

5) Can you prebake crust for a fruit pie?

If you struggle with a pale, pasty bottom crust in your fruit pie, then yes, you can prebake it — with a couple of caveats:

  • Choose a single-crust fruit pie, one with a crumb or streusel topping. Double-crust pie recipes aren’t a good choice because it’s tricky combining a baked bottom crust with an unbaked top crust; they don’t seal well, and fruit juice tends to bubble out around the edges.
  • Be prepared to use a pie shield to protect the exposed crust around the pan’s rim. Most of the baked crust will be insulated by its fruit filling and won’t overbake or burn despite its second trip through the oven; but the edge of the crust, the part on the rim, can burn if it’s not covered.

So, soggy bottoms begone! From now on I expect every pie you bake will have a deep golden brown, flaky, crispy crust on the bottom —all because of the prebake.

And if you have any other questions about pie — from creating tender, flaky crust to thickening fruit filling to assessing when your pie is perfectly baked — please check out our Pie Baking Guide.

Cover photo by Anne Mientka

How to prebake pie crust — and why you should (2024)

FAQs

Why do you Prebake pie crust? ›

What is pre-baking a pie crust exactly? Pre-baking, or blind baking, is a process in which pie dough is placed into its pan and baked in the oven prior to filling. Pre-baking keeps the rising steam from puffing up the layers of crust during baking.

What is the best way to pre bake pie crust? ›

Line the crust with foil, parchment, or a paper coffee filter. Fill it about two-thirds full with dried beans, uncooked rice (or other uncooked grain berries), pie weights, or granulated sugar. Bake the crust in a preheated 375°F oven for 20 minutes, set on a baking stone or steel if you have one.

What is the procedure for preparing a prebaked pie shell? ›

Preheat the oven to 350 degrees. Cut out a circle of aluminum foil or parchment paper and fit it into the chilled pie shell. Fill with rice, beans, or ceramic pie weights and bake the pie shell for about 15 minutes, or until the edges are just golden and beginning to pull away from the sides of the pan.

How long do you blind bake a pie crust? ›

Add pie weights, dry rice, dried beans or (as I've done here) dry wheat berries, enough to fill the pan 2/3 full. Chill the crust for 30 minutes; this will solidify the fat, which helps prevent shrinkage. Bake in a preheated 375°F oven for 20 minutes. Remove the pie from the oven, and lift out the paper and weights.

What happens if you don't pre-bake pie crust? ›

Some recipes like quiches recommend partially cooked pie shells because the baking time wouldn't be long enough to fully cook the dough otherwise. Pre-baking a crust can ensure that your pie or tart crust will be fully baked and browned, and not soggy.

What kind of pies need a prebaked crust? ›

Typically, the crust takes longer to cook than the filling. This is often the case for pie recipes with custard fillings, like this chocolate chess pie, this pumpkin pie, or this rhubarb custard pie. Pre baking the crust for those types of pies will give the pie crust a head start by partially baking it.

Should you poke holes in the bottom of pie crust? ›

With docking, the holes allow steam to escape, so the crust should stay flat against the baking dish when it isn't held down by pie weights or a filling. Otherwise the crust can puff up, not only impacting appearance but also leaving you with less space for whatever filling you have planned.

What happens if you don't chill pie crust before baking? ›

Non-chilled crust is fairly crumbly and less smooth, which makes it harder to roll out and means it may not look as polished. It will brown more quickly and the final product will likely be tougher, heavier, and more doughy – none of those in a bad way. It will likely have a more intense, butter flavor.

Should pie crust be room temperature before baking? ›

When you're ready to make pie, remove the crusts from the refrigerator or freezer, leaving them wrapped. Allow to thaw (if frozen) or warm a bit at room temperature (if chilled longer than 30 minutes), until softened enough to roll but still cold to the touch.

How to blind bake a pie crust without weights? ›

Blind-Baking Method: Parchment Paper and Uncooked Rice

For this test, we baked the crust exactly as we did the dried bean method above: Chill the dough, line the shell with parchment paper, and fill with uncooked rice, then bake the pie crust at 425°F for 15 minutes.

Why is it called blind baking? ›

The term "blind" means that the pastry shell is baked without any filling, and "baking" refers to the cooking process in the oven.

How to keep pie crust from getting soggy after baking? ›

Crust dust is a 1:1 mixture of flour and granulated sugar. When baking a pie, especially a fruit pie, a couple of teaspoons of crust dust sprinkled into the bottom of the crust will help prevent the crust from becoming saturated with juicy filling as it bakes.

What temperature do you Prebake pie crust? ›

Wrap in plastic wrap or parchment paper, place in ziplock or other airtight bag/vessel, and stash in the fridge for at least 30 minutes, but ideally 12 to 24 hours or for as long as 3 days. You also can store it in the freezer for as long as 3 months. To parbake or blind bake the pie crust: Heat your oven to 425ºF.

Should I egg wash my pie crust before blind baking? ›

An egg wash is not necessary when blind baking, though if you want to add some shine to the edges of the pie, you can brush the crust with egg wash after removing the pie weights and before returning the pie to the oven to finish baking.

Do all pies need to be blind baked? ›

There are two times when blind baking is necessary: When we're making a custard pie or when the pie filling is unbaked.

Do I need to cook a pie crust before making my pie in it? ›

You do not need to pre-bake a pie crust for an apple pie or any baked fruit pie really, but we do freeze the dough to help it stay put. Pre-baking the pie crust is only required when making a custard pie OR when making a fresh fruit pie. you should probably get: Pie weights are super helpful to have for pre-baking.

How do you keep a pie crust from getting soggy on the bottom? ›

Brush the Bottom with Corn Syrup or Egg White

Coating the inside surface of the bottom crust will create a barrier to prevent sogginess.

Top Articles
Latest Posts
Article information

Author: Foster Heidenreich CPA

Last Updated:

Views: 6383

Rating: 4.6 / 5 (76 voted)

Reviews: 91% of readers found this page helpful

Author information

Name: Foster Heidenreich CPA

Birthday: 1995-01-14

Address: 55021 Usha Garden, North Larisa, DE 19209

Phone: +6812240846623

Job: Corporate Healthcare Strategist

Hobby: Singing, Listening to music, Rafting, LARPing, Gardening, Quilting, Rappelling

Introduction: My name is Foster Heidenreich CPA, I am a delightful, quaint, glorious, quaint, faithful, enchanting, fine person who loves writing and wants to share my knowledge and understanding with you.